Skip to main content

ODH

Question #6 is incorrect. The correct response is: B Your response was: A

[6] To enter an ODH Class 2 area, an ODH RESTRICTED person must:
      [A]     Enter and remain with at least one partner that is ODH QUALIFIED.
      [B]     Enter and remain with at least two people who are ODH QUALIFIED.
      [C]     Contact the Fermilab Fire Department prior to entry.
      [D]     Contact the Div/Sec Senior Safety Officer or the Laboratory Director prior to entry.
Question #8 is incorrect. The correct response is: D Your response was: A

[8] Entry into a Class Zero ODH area requires:
      [A]     Medical evaluation and ODH training.
      [B]     Escape packs and oxygen monitors.
      [C]     Oxygen monitors only.
      [D]     There are no special requirements for entry into ODH Class Zero areas.
Question #10 is incorrect. The correct response is: B Your response was: A

[10] A 5 minute ELSA escape pack is activated by:
      [A]     Turning the small black knob on the right side on the neck.
      [B]     Turning the large knob on the top of the neck.
      [C]     Pulling the ring.
      [D]     Removing the pack from the case.
Question #14 is incorrect. The correct response is: D Your response was: A

[14] At Fermilab, when are fixed monitors an acceptable substitute for portable monitors?
      [A]     In Class Zero ODH areas.
      [B]     In Particle Physics Division Fixed Target Area tunnels.
      [C]     In the Tevatron tunnel.
      [D]     Never, unless the specific application has a written exemption from the Director's Office.
Question #15 is incorrect. The correct response is: C Your response was: A

[15] In-place area oxygen monitors:
      [A]     Alarm when the oxygen concentration drops to 19.5%.
      [B]     Sound a high-pitched, pulsed siren and activate a flashing red light.
      [C]     Alarm with a high-pitched siren and flashing red light at an oxygen concentration of 18%.
      [D]     Are located in all service buildings.

Comments

Post a Comment

https://gengwg.blogspot.com/

Popular posts from this blog

OWASP Top 10 Threats and Mitigations Exam - Single Select

Last updated 4 Aug 11 Course Title: OWASP Top 10 Threats and Mitigation Exam Questions - Single Select 1) Which of the following consequences is most likely to occur due to an injection attack? Spoofing Cross-site request forgery Denial of service   Correct Insecure direct object references 2) Your application is created using a language that does not support a clear distinction between code and data. Which vulnerability is most likely to occur in your application? Injection   Correct Insecure direct object references Failure to restrict URL access Insufficient transport layer protection 3) Which of the following scenarios is most likely to cause an injection attack? Unvalidated input is embedded in an instruction stream.   Correct Unvalidated input can be distinguished from valid instructions. A Web application does not validate a client’s access to a resource. A Web action performs an operation on behalf of the user without checkin...
2 comments
Read more

CKA Simulator Kubernetes 1.22

  https://killer.sh Pre Setup Once you've gained access to your terminal it might be wise to spend ~1 minute to setup your environment. You could set these: alias k = kubectl                         # will already be pre-configured export do = "--dry-run=client -o yaml"     # k get pod x $do export now = "--force --grace-period 0"   # k delete pod x $now Vim To make vim use 2 spaces for a tab edit ~/.vimrc to contain: set tabstop=2 set expandtab set shiftwidth=2 More setup suggestions are in the tips section .     Question 1 | Contexts Task weight: 1%   You have access to multiple clusters from your main terminal through kubectl contexts. Write all those context names into /opt/course/1/contexts . Next write a command to display the current context into /opt/course/1/context_default_kubectl.sh , the command should use kubectl . Finally write a second command doing the same thing into ...
Post a Comment
Read more