Skip to main content

10 Ways to Make Your Digital Photos Last Forever

http://www.gadgetspage.com/cameras/10-ways-to-make-your-digital


10 Ways to Make Your Digital Photos Last Forever

Filed under: Cameras — Michael Moncur @ 2:00 am

This could happen to you.Photographs taken with film fade with age, and even
negatives yellow and become brittle. Digital photos, on the other hand,
retain the same brilliant color and clarity every time you pull them up on
the computer screen—until your hard disk crashes and you instantly lose
every photo you’ve ever taken.

Yes, digital photography has its share of disasters, and that leads some
people to distrust it, or even to claim that film lasts longer than digital.
But the good news is that your digital pictures can last forever if you
take good care of them. Here are 10 rules to follow to make sure you don’t
lose pictures to a digital catastrophe:
1. Use a quality memory card.

Start with the “film” your pictures are stored on: the memory card. While
the cheap memory cards offer a huge capacity for a small price, it’s best
to pay a bit more and get a quality card. A card from a good manufacturer
will have less risk of data corruption or other failures. Sandisk, Lexar,
and Kingston are good choices.

    * Tip: Buy two smaller cards instead of one larger one: for example, two
1GB cards instead of one 2GB card. This will often save you money, and you
’ll also have a hedge against data loss—one corrupt card will only affect
half of your photos.

2. Get those photos off that memory card.

You might have a huge memory card in your camera that can store thousands of
photos, but you should still consider the memory card temporary storage—a
memory card can fail, or can be lost or stolen with the camera. Whenever you
finish taking a batch of pictures or return from a trip, use a card reader
or USB cable to transfer the pictures to the computer.
3. Don’t delete photos in the camera.

Your camera probably has a convenient “Delete” or “Trash” button. I
suggest you never use it. There are three reasons for this:

    * You avoid accidentally deleting the wrong picture, or accidentally
using the “delete all” option.
    * I find it helpful to keep all of my photos, since even the “mistakes
” could turn out to be the only photo of something important, or a “happy
accident” that is good in its own way.
    * Can you really determine which photos are good or bad by looking at
your camera’s tiny screen? It’s much better to transfer them all to the
computer, then decide what to keep.

4. Don’t delete photos at all.

For that matter, why delete photos at all? I keep every photo I take with my
digital cameras: the great shots, the out-of-focus shots, the mistakes, the
duplicates, everything. Even the bad ones are useful years later for
documenting my vacations and remembering what I saw, for seeing how my
photographic technique has improved, or for seeing whether a camera is
working as well as it used to. This also ensures that I never delete the
wrong photo. If there’s a gap in the numbering on my original photo files,
I know something’s missing.

If you don’t have room for all of your photos on your hard drive, remember
that hard drives are cheap. You can also archive the old ones to CD or DVD
media.
5. Keep a Backup. Or two.

Did I mention that hard drives are cheap? I recommend keeping two copies of
all of your original photos at all times. I have a daily backup script that
copies the new files to an external drive. Be sure to use a separate drive
or another computer as your backup, to avoid losing photos in a drive crash.

If you want to guarantee you won’t lose photos, you should also have an off
-site backup—use an online backup service, upload them to a server, or just
drop off a few DVD-ROMs at a friend’s house. That way your photos are
protected even if you have a house fire or other disaster.
6. Use generic photo formats.

Most cameras store images in the standard JPEG format, which should be
easily readable for many years. However, higher-end cameras usually have a
RAW format option. While raw images are great for post-processing and often
beat JPEG in quality, keep in mind that all raw formats are proprietary, and
you may have trouble opening these files 10 years from now. It’s best to
save a standard JPEG or TIFF version of each photo, even if you use RAW.
Some cameras can save a JPEG file along with the RAW file, giving you the
best of both worlds.

    * Tip: If you are serious about your photography and insist on using RAW
format, keep a backup copy of the software you use to process the files.
You might need to install it on an antique PC 10 years from now to access an
old photo.

7. Don’t edit original photos.

If you use a photo, you’ll often resize, crop, or otherwise process it.
This is fine, but the first thing you should do when editing a photo is save
it to a new file. Keep the original, unprocessed, full-resolution file
along with your edited version. This will make it easier to use the photo
for a different purpose later, and it also avoids the costly mistake of
overwriting a photo with a messed-up version. Back up the edited version too
.

    * Tip: Unless you’re very careful and use special software, overwriting
a photo will erase the EXIF data that the camera stored with the photo.
This is your record of the date and time the picture was taken and the
camera settings used.

8. Don’t trust someone else with your photos.

Online photo sharing sites like Flickr are great for sharing photos, but
avoid the temptation to use them for storing photos. Don’t trust an online
service with the only copy of your photos, or even the backup copy.

Online services might go out of business, and they don’t guarantee that
your data will be safe—especially if you forget to pay the bill. They also
almost always process the photo (resizing, etc.) when you upload it. Use
these services to share pictures, but don’t expect them to last forever
there.
9. Test and maintain your backup files.

A backup copy is no good if it doesn’t work, or if you lose access to it.
Here are a few tips for making sure your backups will back you up:

    * Take a look at your backup files regularly, and make sure you can load
a few photos.
    * If you back up to a hard disk, check the disk for errors regularly.
    * If you back up to CD-R or DVD-R, use quality backup media.
    * Test CD or DVD backups every month or two.
    * Once every year or two, copy CD or DVD backups to brand new discs.
Media has a lifespan potentially as low as 5 years.
    * If you get a new computer, be sure to move the photos from your old
computer, and make sure you still have two copies.
    * If CD or DVD formats are going away in favor of some kind of new Super
Blue-HD discs, copy your files to the new media as soon as it’s practical.

10. Label, organize, and sort your photos.

If you follow the above rules for 20 years, you’ll end up with thousands of
great photos—and now you have a different problem. Finding a few pictures
of “that one time we went to Yellowstone” could be virtually impossible
when you have thousands of photos stored in a disorganized mess of folders.

At the very least, do what I do: store each batch of photos in a separate
folder with a descriptive name beginning with the date. Here are some
examples:

    * 2006-05-10 Yellowstone Park
    * 2006-08-22 Testing new Camera
    * 2006-09-01 Elvis sighting at Caesar’s Palace
    * 2006-12-26 Opening Christmas presents

I avoid renaming the photo files, since I consider them my “negatives” and
want a complete record of the pictures I’ve taken. Instead, I store them
in folders like the above, then group those into larger folders for each
year. This makes it easy to find particular photos, and the pictures are in
convenient groups for archiving to DVD-ROMs every few months.

You may even want to move the best photos (or the ones you’ve chosen to
print) into a separate folder within each folder, especially if you’re like
me and you have more “misses” than “hits”.

If you want to go one step further, you can catalog your photos with a
program like ACDSee, which lets you store a title, description, keywords,
and rating for every photo. That would make it even easier to find what you
’re looking for, if you can find the time to label and rate each picture.



Comments

Popular posts from this blog

CKA Simulator Kubernetes 1.22

  https://killer.sh Pre Setup Once you've gained access to your terminal it might be wise to spend ~1 minute to setup your environment. You could set these: alias k = kubectl                         # will already be pre-configured export do = "--dry-run=client -o yaml"     # k get pod x $do export now = "--force --grace-period 0"   # k delete pod x $now Vim To make vim use 2 spaces for a tab edit ~/.vimrc to contain: set tabstop=2 set expandtab set shiftwidth=2 More setup suggestions are in the tips section .     Question 1 | Contexts Task weight: 1%   You have access to multiple clusters from your main terminal through kubectl contexts. Write all those context names into /opt/course/1/contexts . Next write a command to display the current context into /opt/course/1/context_default_kubectl.sh , the command should use kubectl . Finally write a second command doing the same thing into ...

OWASP Top 10 Threats and Mitigations Exam - Single Select

Last updated 4 Aug 11 Course Title: OWASP Top 10 Threats and Mitigation Exam Questions - Single Select 1) Which of the following consequences is most likely to occur due to an injection attack? Spoofing Cross-site request forgery Denial of service   Correct Insecure direct object references 2) Your application is created using a language that does not support a clear distinction between code and data. Which vulnerability is most likely to occur in your application? Injection   Correct Insecure direct object references Failure to restrict URL access Insufficient transport layer protection 3) Which of the following scenarios is most likely to cause an injection attack? Unvalidated input is embedded in an instruction stream.   Correct Unvalidated input can be distinguished from valid instructions. A Web application does not validate a client’s access to a resource. A Web action performs an operation on behalf of the user without checkin...