Skip to main content

底特律加拿大签证实用信息(F/J类)

刚刚去底特律办了加拿大签证,之前参考过精化区的帖子,不过好像是几年前的老帖
,一些信息有所变化,我来写一个简明流程以供参考吧

http://www.cic.gc.ca/english/information/applications/visa-pilot.asp
这是官方网站,所有需要的信息和表格下载都在上面,建议好好看看
办签证可以选择邮寄材料或者本人前去。邮寄办理需要好几周时间,并且把护照表格
文件寄来寄去总不太放心,所以人去是最好的选择,无需预约,当天就能拿到。需要的
材料包括:
1. 申请表IMM 5257,带老婆孩子也只需填一张表
2. 每人两张35mm*45mm照片(其中一张的背面写上名字和生日),注意不是美国标准的
2寸照。我是把现有的数码头像裁减后ps到一张4in*6in的照片上,一张照片可以放8张
头像,到walgreens的自助机器上3毛钱打印出来
3. 护照及I94原件
4. 移民信息文件(证明你会很快回到美国)
i. 对于学生:I20/transcript/注册课程或者学费证明/student ID,除了I20都是补
充材料,但基本上都会被问到
ii. 对于访问学者:DS2019/paystub,后者证明有固定工作和收入,多少不重要
5. 银行存款证明:办一个比较顺利,证明有足够资金。我是到tcf的柜台上开的,免费
服务,不会冻结存款
6. 还准备了学生证和驾照的复印件,有备无患
7. 现金75刀(single entry)
领馆walk in时间是周一到五早上8点半到11点,从ann arbor开车过去45分钟,一路
高速到ren center,早转了一个路口一看是到加拿大的通道,昏倒,在一堆警车的注视
下掉个头又出来了
省事直接停在楼内停车场,3块钱/小时12块封顶。对面的meter应该便宜一些。停车
场3楼通道走过去,顺着指示牌找到600号,在大厅里就能看到申请加签证的标牌。虽然
领馆地址是在11楼,但实际上是先在一楼排队递材料和面谈。就是一个小厅3个窗口,
跟mall里的商店一样,没有安检什么包啊手机阿随便带,跟美领馆完全不一样
阿三很多。味道很大。排到窗口扯两句,材料齐全一般2分钟就过,材料拿回来加给
一个小黄条,到外面大厅的服务台拿一个visitor的胸牌,然后去电梯井。警卫看了胸
牌就放行,到里面坐电梯去11楼,就是去交钱的,收了钱告诉取签证的时间,然后就可
以下楼去晃悠了,到点再上去。我们是9点到领馆,10点半交钱,11点45分拿到签证。
去的晚说不定要等到下午了
中间等着的个把钟头在ren center里面晃。其实挺好的组合建筑不逊于boston的
convention center,很多高楼连成一片公司酒店餐饮娱乐购物电影院一应俱全,可惜
城市衰败,大楼里也是冷冷清清远不像boston的繁华,店铺都空着倒是底特律警察局在
里面开了个mini station,每层楼都能看到三五个警察走来走去。100-400那片的底楼
有一大块GM showroom还是挺赏心悦目的,好多好车,旁边有个food court可以解决午饭
然后就回来了。这个签证的做工也有点水,居然没有头像,不知道他们要我们照片是
干嘛的

Comments

Popular posts from this blog

CKA Simulator Kubernetes 1.22

  https://killer.sh Pre Setup Once you've gained access to your terminal it might be wise to spend ~1 minute to setup your environment. You could set these: alias k = kubectl                         # will already be pre-configured export do = "--dry-run=client -o yaml"     # k get pod x $do export now = "--force --grace-period 0"   # k delete pod x $now Vim To make vim use 2 spaces for a tab edit ~/.vimrc to contain: set tabstop=2 set expandtab set shiftwidth=2 More setup suggestions are in the tips section .     Question 1 | Contexts Task weight: 1%   You have access to multiple clusters from your main terminal through kubectl contexts. Write all those context names into /opt/course/1/contexts . Next write a command to display the current context into /opt/course/1/context_default_kubectl.sh , the command should use kubectl . Finally write a second command doing the same thing into ...

OWASP Top 10 Threats and Mitigations Exam - Single Select

Last updated 4 Aug 11 Course Title: OWASP Top 10 Threats and Mitigation Exam Questions - Single Select 1) Which of the following consequences is most likely to occur due to an injection attack? Spoofing Cross-site request forgery Denial of service   Correct Insecure direct object references 2) Your application is created using a language that does not support a clear distinction between code and data. Which vulnerability is most likely to occur in your application? Injection   Correct Insecure direct object references Failure to restrict URL access Insufficient transport layer protection 3) Which of the following scenarios is most likely to cause an injection attack? Unvalidated input is embedded in an instruction stream.   Correct Unvalidated input can be distinguished from valid instructions. A Web application does not validate a client’s access to a resource. A Web action performs an operation on behalf of the user without checkin...